View MN101C309_991693.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MN101C309 , MN101C30A
Type ROM (x 8-bit) x
External memory can be expanded MN101C309 24 K MN101C30A 32 K
RAM (x 8-bit) x
External memory can be expanded
1K
1.5 K
Package (Conventional Package) Minimum Instruction Execution Time
LQFP064-P-1414 *Lead-free, SDIP064-P-0750C *Lead-free (under planning) (SDIP064-P-0750) 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238 s (at 2.7 V to 5.5 V, 8.39 MHz) 1.00 s (at 2.0 V to 5.5 V, 2 MHz)* 125 s (at 2.0 V to 5.5 V, 32.768 kHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.7 V. * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * Timer 0 * Timer 1 * Timer 2 * Timer 3 * Timer 4 * Timer 5 * Time Base * Serial 0 * Serial 1 * Automatic transfer finish * A/D conversion finish Timer counter 0 : 8-bit x 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 0 Timer counter 1 : 8-bit x 1 (square-wave output, event count, synchronous output event) Clock source ********************* 1/16, 1/64 of system clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 1 Timer counter 0, 1 can be cascade-connected. Timer counter 2 : 8-bit x 1 (square-wave/8-bit PWM output, event count, synchronous output event) Clock source ********************* 1/1, 1/4 of system clock frequency; 1/1 of XI oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 2 Timer counter 3 : 8-bit x 1 (square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 3 Timer counter 2, 3 can be cascade-connected. Timer counter 4 : 16-bit x 1 (square-wave/16-bit PWM output, event count, synchronous output event, input capture) Clock source ********************* 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency; external clock input Interrupt source **************** coincidence with compare register 4 Time base timer (one-minute count setting, independently operable 8-bit timer counter 5) Clock source ********************* 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency; 1/1, 1/8192 of XI oscillation clock frequency Interrupt source **************** coincidence with compare register 5; 1/8192 prescaler overflow Watchdog timer Interrupt source **************** 1/65536, 1/262144, 1/1048576 of system clock frequency (ROM option)
Interrupts
Timer Counter
1
MAD00005DEM
MN101C309 , MN101C30A
Serial Interface
Serial 0 : synchronous type/simple UART (half-duplex) x 1 Clock source ********************* 1/2, 1/4, 1/16 of system clock frequency; 1/2 of timer counter 3 frequency Serial 1 : synchronous type x 1 Clock source ********************* 1/2, 1/8, 1/64 of system clock frequency; output of timer counter 3
I/O Pins A/D Inputs Special Ports
I/O Input
41 13
* Common use * Specified pull-up resistor available * Input/output selectable (bit unit) * Common use * Specified pull-up resistor available
10-bit x 8-ch. (with S/H) Buzzer output, remote control carrier signal output, high-current drive port
Electrical Characteristics
Supply current
Limit Parameter Symbol IDD1 IDD2 Supply current at HALT IDD3 fx = 32.768 kHz, VDD = 3 V, Ta = 85C VDD = 5 V, Ta = 25C Supply current at STOP IDD4 VDD = 5 V, Ta = -40C to +85C 18 2 20 Condition min Operating supply current fosc = 20 MHz, VDD = 5 V fx = 32.768 kHz, VDD = 3 V fx = 32.768 kHz, VDD = 3 V, Ta = 25C typ 25 30 4 max 60 100 8 mA A A A A A Unit
See the next page for pin assignment and support tool.
MAD00005DEM
2
Pin Assignment
LED3,D3,P83 LED2,D2,P82 LED1,D1,P81
A11,P73,SDO3 A10,P72,SDO2 A9,P71,SDO1 A8,P70,SDO0
(
) : Old Package
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50
P84,D4,LED4 P85,D5,LED5 P86,D6,LED6 P87,D7,LED7 P77,A15,SDO7 P76,A14,SDO6 P75,A13,SDO5 P74,A12,SDO4 P73,A11,SDO3 P72,A10,SDO2 P71,A9,SDO1 P70,A8,SDO0 P67,A7 P66,A6 P65,A5 P64,A4 P63,A3 P62,A2 P61,A1 P60,A0 P54,A17 P53,A16 P52,CS P51,RE P50,WE P24,IRQ4 P23,IRQ3 P22,IRQ2 P21,IRQ1,SENS P20,IRQ0 P14,TM4IO P13,TM3IO
LED0,D0,P80
P54,A17 P53,A16
VREFP51,RE P52,CS
P67,A7
P66,A6
P65,A5
P64,A4
P63,A3
P62,A2
P61,A1
P60,A0
AN0,PA0 AN1,PA1 AN2,PA2 AN3,PA3
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
SDO4,A12,P74 SDO5,A13,P75 SDO6,A14,P76 SDO7,A15,P77 LED7,D7,P87 LED6,D6,P86 LED5,D5,P85 LED4,D4,P84 LED3,D3,P83 LED2,D2,P82 LED1,D1,P81 LED0,D0,P80 VREFAN0,PA0 AN1,PA1 AN2,PA2
33
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64
AN4,PA4
32 31 30 29 28 27
P50,WE P24,IRQ4 P23,IRQ3 P22,IRQ2 P21,IRQ1,SENS P20,IRQ0 P14,TM4IO P13,TM3IO P12,TM2IO P11,TM1IO P10,TM0IO,RMOUT P27,RST P06,BUZZER,DK SBT1,P05 SBI1,P04 SBO1,P03
AN5,PA5 AN6,PA6 AN7,PA7 VREF+ VDD OSC2 OSC1 VSS XI XO MMOD TXD,SBO0,P00 RXD,SBI0,P01 SBT0,P02 SBO1,P03 SBI1,P04
MN101C309 MN101C30A
26 25 24 23 22 21 20 19 18
MN101C309 49 MN101C30A 48
47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
10
11
12
13
14
15
16
17
1
2
3
4
5
6
7
8
9
AN3,PA3
AN4,PA4
AN5,PA5
AN6,PA6
AN7,PA7
VDD
XI
XO
P00,SBO0,TXD
P01,SBI0,RXD
P02,SBT0
VREF+
OSC2
OSC1
VSS
MMOD
SBT1,P05 DK,BUZZER,P06 RST,P27 RMOUT,TM0IO,P10 TM1IO,P11 TM2IO,P12
LQFP064-P-1414
*Lead-free
SDIP064-P-0750C (SDIP064-P-0750)
*Lead-free
(under planning)
Support Tool
In-circuit Emulator EPROM Built-in Type
PX-ICE101C/D+PX-PRB101C30-LQFP064-P-1414 Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time MN101CP30ABL 32 K 1.5 K 0.10 s (at 4.5 V to 5.5 V, 20 MHz) 0.238s (at 2.7 V to 5.5 V, 8 MHz) Package (Conventional Package) LQFP064-P-1414 *Lead-free, SDIP064-P-0750C *Lead-free (under planning) (SDIP064-P-0750)
3
MAD00005DEM
MN101C309 , MN101C30A
MAD00005DEM
4
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL

▲Up To Search▲

Price & Availability of MN101C309

	To Download MN101C309 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .